The ReGen Laser by BioPhotonica
You might already know BioPhotonica for making the highest quality, most powerful and flexible whole-body pods (the ReGen Pod) and now they are expanding into high performance lasers. Over the years, we have helped dozens of laser companies spec systems for the US market, we work very closely with Biophotonica to spec the ultimate class-4 laser.
The ReGen Laser's uses their proprietary Stim-Cell™ Technology, which combines high efficiency wavelengths at very high power levels combined with proprietary multi-step factory protocols and smart accessories to provide the best balance and performance. Stim-Cell™ Technology leverages decades of research and all the best-practices from the laser therapy market to reach the pinnacle of laser design.
The ReGen Laser from BioPhotonica delivers superior performance to lasers costing 2 or 3 times as much money but what really makes this system stand out is the performance and quality. The fit and finish of the ReGen Laser are best-in-class. These lasers are built to last and the 5-year warranty proves it. ReGen Lasers comes in dual, triple and quad-wavelengths with all systems having 810nm as the primary wavelength so they all have the best penetration depth and ATP production. The secondary wavelengths like 630, 905, 980 and 1064 add more flexibility on top of the base 810nm. They offer up to 60-watt systems and all of them offer some of the lowest cost per watt on the market.
ReGen XD 1
|Power / Wavelength||
Total Power: 40w
|Total Power of Diodes: 60w
20 W @ 810nm
20 W @ 980nm
20 W @ 1064nm
|Total Power : 60.2w
20 W @ 810nm
20 W @ 905nm
20 W @ 980nm
200mW @ 635nm
|Delivery Rate||Rate: 40 J/sec CW
36 J/sec Pulse
|Rate: 60 J/sec CW
54 J/sec Pulse
|Rate: 60 J/sec CW
54 J/sec Pulse
|Typical Dosage||7200 joules in 3 minutes||10,800 joules in 3 minutes||10,800 joules in 3 minutes|
|Best Application||Optimized for deep ATP production plus pain and inflammation control.||Higher dosage with 1064nm for even more pain and inflammation control. Perfect for pain clinics||Best for Vet, Equine, and Acupuncture.*2 Maximum flexibility. It does everything well.|
*1The XD can deliver 20 joules/sec at 810nm CW and 20 j/sec CW at 980nm (for optimum pain and inflammation control) OR any combination of wavelengths simultaneously up to 36 j/sec, even while pulsing and 40j/sec CW. Compare this to a Based on over 20 years of writing, summarizing and training practitioners, we know that most laser companies don't put much effort into their protocols. In many of the "huge" protocol libraries form other companies, only the name of the protocol changes. They all default to to delivering max power for 10 minutes and no pulsing. Some systems will put the same dosage into an arthritic thumb as the put into a bad hip, defying all logic and therapy standards. The advanced internal library on the ReGen Laser works perfectly with our extended protocol library to set the laser up to get the best result for each condition listed in the library. If you have used another high-end system, then you will really appreciate the effort that went into the ReGen Laser protocols. It has one of the best internal protocol libraries of any high end laser and better protocols deliver superior results.
Fully Adaptive Protocols and Programmable Duty Cycle
The ReGen Laser follows the best industry practices (like our protocol library) by adapting the treatment parameters to the patient. The setup screen to the left shows how each protocol is adapted based on the patient size, skin color and the chronicity of the condition. In addition to follow the best industry practices, the ReGen Laser system allow for manually over-riding the standards. One of the secrets of the laser industry is the effect of duty-cycle (on/off ratio) on the dosage delivery. Many systems like the LiteForce® use a fixed 50% duty cycle. What this means is that users are paying a very high price to get a 25-watt system (that costs about $30,000) that only puts out 12.5 joules/second anytime they are pulsing the laser. Since you pulse the laser for most application, most users are wasting a huge amount of money because they are confused by the specification and how they change the performance. The ReGen Laser solve this problem by providing users the ability to program the duty cycle. With the ReGen Laser, you can set up to a 99% duty cycle so that means that an ReGen Laser D30 pulsing at 99% will delivers more power (19 joules/second) and save you $16K+ when compared to a LiteForce® system. It makes you wonder why anyone would ever overpay so much.
Superior Emitter and Fiber Design
One of our favorite parts of the system is the emitter and fiber optic cable. It is not a cheap plastic emitter handle or a simplistic machined metal emitter, it is a rubber coated precision-metal emitter that has the feel of a high-end bespoke writing instrument and less like the disposable pen feel you get with other lasers. The emitter has interchangeable heads and pop on and off. The system also includes a unique design roller ball head that slides over the surface of the skin but does not require the laser to pass thought the roller. This reduces the system losses but more importantly, reduces the need for constant cleaning that you get with a traditional roller ball. Old school roller balls create a constant buildup of dead skin inside the roller ball, which eventually blocks off the laser beam and damages the system. This issue is reduced with the ReGen Laser. The rubber coated emitter handle is more ergonomic than any other design we have seen. This reduces stress on the practitioner and is much more comfortable to hold while also reducing drop damage that often destroys plastic emitters. The fiber optic cable between the emitter and base is also extra long (about 7 ft.) and more ergonomic than many other class-4 systems. The system uses a compact and flexible 400-micron fiber without excessive armor around the cable. The ReGen laser learns from other company's design failures that use a large diameter fiber that puts more stress on the operator as they are constantly pulling on a heavy cable around as they are treating patients. Larger cables increase the strain on the operator and onto the connectors at the end of the armored cable than therefore increases connector failures. Many systems with armored cables have an external connector which does allow them they more easily replace the "flawed design", but the external connector is actually the biggest failure point for class 4 lasers. It must be kept spotlessly clean because even one spec of dust at this connector can destroy the laser. The ReGen laser is a superior design because the critical connector at the end of the fiber is inside the base, keeping it clean and adding to the reliability.
The ReGen Laser sticks to the most established wavelength, 810nm, as the primary wavelength and allows secondary wavelengths for 980nm on the dual and adds 905nm and 625nm to the quad. Although these wavelength have a shallower depth of penetration, they are great for supplemental therapies. For animals with hoof and blood related problems, the 625nm wavelength is preferred and when you want a wavelength where most of the energy is converted into heat, the 980nm can be used for increasing circulation and extra pain control. This system give practitioners full access so they can optimize their treatment for a wide variety of applications. The EVO laser provides for a very high 3-dimensional power density that many experts think is the key to faster therapeutic outcomes. Although lower power devices can deliver the same total energy level given enough time, they can never reach the same power density of the ReGen Laser class-4 systems.
For some practices, minimizing patient treatment times while still delivering great results is a high priority. For these types of practices, the 40 watt ReGen Laser provides a cost effective solution. Practitioners can deliver 7200 joules in just 3 minutes so this device gives you the option to have extremely short treatment times AND deliver very high dosages for maximum impact. Because the ReGen Laser has the programmable duty cycle (on/off ratio), you can deliver 6480 joules pulsing in 3 minutes with pulsing. This totally crushes other systems that have a fixed duty cycle of 50% or less. With the ReGen Laser, you can create custom protocols that include high duty cycle pulsing. We often recommend pulsing in the 4 - 40 Hz but at a 90% duty cycle. This give practitioners both pulsing and higher dosage. Very few other systems on the market allow this control at any price.
Like all Biophotonica systems, the ReGen Laser has optional WiFi connectivity. This means that the system can continue to evolve and improve even after you buy it. As technology advances, so does your ReGen Laser. The system allows for both software and protocol updates. This makes the system more Future-proof than most other class 4 lasers. The fit and finish on the laser is excellent and the 5 year warranty lets you know that is system will be a work-horse for many years to come.
The ReGen Laser would be one of our first recommendations for any user who wants a high dosage therapy laser with maximum flexibility, great quality and great support. This system comes with a 30-day money back guarantee.
|Standard - The standard emitter is adjustable from 1/2 to 1-1/2 inch treatment area and open cage design reduces heating||Included|
|Sealedl Lens - This emitter is best for on hair/fur as the end of the emitter is sealed.||Included|
|Large 4-Inch Hybrid Roller -This large emitter is mainly for hands-free therapies but can also be used to for higher delivery rates into dark pigment skin, fur or hair.||
Crushing the Competition
The ReGen Laser design elevates the best technology seen in the Italian-made Eltech K-Laser®(Compare ReGen Laser to K-laser). It also has several big technical advantages when compared to a LightForce® and Summas® lasers like adjustable duty cycle (on/off ratio when pulsing) and multi-step pulsing ( Compare ReGen Laser to LightForce).
All 3 systems include the laser controller, standard emitter, hard case, 2 pairs of glasses, manuals and training. The price also include shipping.
This system can be sold to professionals and for home use.
Comparison of class 4 lasers*
|Product||Infra Red Power||Interface||Emitter||Output||Price|
|10.1 inch touch||
|CW, Pulse, Multi- pulse||
|Pilot Laser||9,000mW@810nm||LED with membrane keypad||Aluminium cylinder||CW and 1 Pulse Option||$7,995|
|7.2 inch touch||Metal standoff||CW, Pulse, Multi- pulse||
|5,000mW@810nm||LCD||Smooth glass direct emitter||CW Only||$6,999|
|25,000mW non-adjustable blend of 80% 980nm & 20% 810nm||8 inch Touch||Roller ball||CW and Pulse||$25,000 and Up?|
|40,000mW non-adjustable blend of 80% 980nm & 20% 810nm||12 inch Touch||Roller ball||CW and Pulse||$35,000?|
Eltech K-Laser™ Cube 3
|15,000 mW ISP
12,000mW CW -
100mW @ 635nm 12,000mW 810nm
|4.8 inch Touch||Metal standoff can be used unattended||CW and Pulse||$19,950|
Eltech K-Laser™ Cube 4
20,000 mW ISP
|4.8 inch Touch||Metal standoff can be used unattended||Most protocols are based on Pulsing but can do CW||
ReGen Laser Systems Specs
|Touch Screen||10.1-inch full color|
|Internal Library||Searchable by condition, Customized|
|Included Accessories||Heavy-Duty Carrying Case, Safety Goggles (2 pairs), Therapy Handpiece, and full documentation|
|Weight||12 lbs / 25 Kg|
|Dimensions||11” (W) X 11” (L) X 8”(H)|
|Operating Voltage||110/220 VAC, 5A, 50/60 Hz With universal power input|
|Laser Peak Power||XD: 40W (40,000mW)
XT: 60W (60,000mW)
XQ: 60.2W (60,200mW)
|Fiber Optic Connection||400 microns with a SMA905 connectors|
|Emitter||GaAlAs Diode Laser|
|Operating Mode||Continuous Wave (CW), Pulsing (Frequency) Single, or Sweep Pulsing|
|Aiming Beam||Red Diode Laser, Wavelength: 635nm, Power:1-3mW|
My patients just love the ReGen Laser because it consistently delivers great results. - Dr. Inman
Here are a few reasons to buy from ColdLasers.Org
|ColdLasers is a "Brick and Mortar"
Located at 921 Main Street in Louisville, CO, we are no virtual store front, we are the biggest and best PBM store in the US.
|The Best Support in the Laser Industry
We will do everything in our power to make sure you get unbiased advice, the best training and the best service support.
|No Sales Tax Outside Colorado
The price on the site is the total price if you live outside of Colorado.
All our system include a warranty between 1 and 5 years. If there is a problem, contact us and we will help you.
|30-Day Satisfaction Guarantee
Pros get a 30-day 100% money back guarantee on any new system. Home users get a 30-day guarantee but pay a 15% restocking fee.
|Custom Marketing Support
With any Pro system over $5000, you get a custom marketing kit . We send you original artwork including flyers, pamphlets and posters.
|The ColdLasers.Org Reputation
Since 2002, we have supported tens of thousands of customers and maintained a 5-Star rating. You can trust ColdLasers.Org.
|An A+ BBB Accredited Business
As a top-rated BBB business, ColdLasers.Org has established itself as "The Trusted Name In Cold Lasers".
|Low Price Guarantee
ColdLasers.Org will beat any published competitive price and give you better support and training.
Every cold laser system over $2000 includes free 3-Day shipping to anywhere in the US and Canada.
|We Accept all Major Credit cards
We also accept checks and wire transfers.
|Financing for Professionals Available
We work with many different financing companies who focus on financing for professional.
|Your Transaction is protected